Ricoh IM C2000 Series Скачать руководство пользователя страница 362

Страница: 362 / 396

• The maximum transmission rate in the ad-hoc mode is 11 Mbps for IEEE802.11b. The Ad-hoc

communication is not supported in an IEEE802.11g/n environment.

• Channels other than 1–11 cannot be used because of the specifications and the configuration of

the access point.

• The channel in use might differ depending on the country.

Specifications for Device Server Option

Item

Specifications

Interface

• Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)

Operating systems

• Windows 7/8.1/10, Windows Server 2008/2008

R2/2012/2012 R2/2016

• OS X 10.11 or later

Protocol

• Port 9100, IPP, LPR

IPP does not support SPL.

• The device server option allows simultaneous connection of up to

eight sessions of printing protocols.

10. Specifications for The Machine

360

Содержание IM C2000 Series













































































































































































































































































































































































































Результаты поиска

Содержание IM C2000 Series

Отзывы:

Ricoh IM C2000 Series, Руководство пользователя, Страница: 362 / 396

Результаты поиска

Содержание IM C2000 Series

Отзывы: