Ricoh hn1, Руководство пользователя

Страница: 69 / 308

Adjusting Power Saver
To save energy, you can decrease the number of minutes before the printer enters Power Saver mode.
Available settings range from 1–240 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings , and then click General Settings .
3
Click Timeouts .
4
In the Power Saver box, type in the number of minutes you want the printer to wait before it enters Power Saver
mode.
5
Click Submit .
Using the printer control panel
1
Make sure the printer is on and
Ready
appears.
2
On the home screen, touch .
3
Touch Settings .
4
Touch General Settings .
5
Touch the down arrow until
Timeouts
appears.
6
Touch Timeouts .
7
Touch the arrows next to
Power Saver Mode
to select the number of minutes you want the printer to wait
before it enters Power Saver mode.
8
Touch Submit .
9
Touch .
Adjusting the brightness of the display
To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display.
Available settings range from 20–100 . The factory default setting is 100.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings , and then click General Settings .
3
In the Screen Brightness box, type in the brightness percentage you want for your home screen.
4
Click Submit .
Minimizing your printer's environmental impact
69