Ricoh hn1, Руководство пользователя

Страница: 254 / 308

Remove originals from the scanner ADF
Remove the paper from the ADF to clear the message and continue printing.
Remove packaging material, check <x>
Remove any remaining packaging material from the specified location.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Replace <x> if restarting job.
One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner
to restart the scan job. <x> is a page of the scan job.
Try one or more of the following:
•
Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message.
•
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
• Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after
the last successfully scanned page.
• Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned
page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP.
•
Touch Restart job if job recovery is active. The message clears. A new scan job containing the same parameters as
the previous job starts.
Restore Held Jobs?
Try one or more of the following:
•
Touch Continue to restore all held jobs stored on the printer hard disk.
•
Touch Do not restore if you do not want any print jobs to be restored.
Scan Document Too Long
The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message.
Scanner ADF Cover Open
The ADF cover is open. The message clears when the cover is closed.
Securely clearing disk space
The printer hard disk wiping process needs to recover. The message clears when all blocks are cleared.
Troubleshooting
254