Changing port settings after installing a new network Internal
Solutions Port
When a new network Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers
that access the printer must be updated because the printer will be assigned a new IP address. All computers that
access the printer must be updated with this new IP address in order to print to it over the network.
Notes:
•
If the printer has a static IP address that will stay the same, then you do not need to make any changes to the
computer configurations.
•
If the computers are configured to print to the printer by a network name that will stay the same, instead of by IP
address, then you do not need to make any changes to the computer configurations.
•
If you are adding a wireless ISP to a printer previously configured for a wired connection, then make sure the wired
network is disconnected when you configure the printer to operate wirelessly. If the wired connection remains
connected, then the wireless configuration will complete, but the wireless ISP will not be active. In the event that
the printer was configured for a wireless ISP while still attached to a wired connection, disconnect the wired
connection, turn the printer off, and then turn the printer back on again. This will enable the wireless ISP.
•
Only one network connection at a time is active. If you want to switch the connection type between wired and
wireless, you must first turn the printer off, connect the cable (to switch to a wired connection) or disconnect the
cable (to switch to a wireless connection), and then turn the printer back on again.
For Windows users
1
Print a network setup page and make a note of the new IP address.
2
Click , or click
Start
and then click
Run
.
3
In the Start Search or Run box, type
control printers
.
4
Press
Enter
, or click
OK
.
The printer folder opens.
5
Locate the printer that has changed.
Note:
If there is more than one copy of the printer, then update all of them with the new IP address.
6
Right-click the printer.
7
Click
Properties
.
8
Click the
Ports
tab.
9
Locate the port in the list, and then select it.
10
Click
Configure Port
.
11
Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network
setup page you printed in step 1.
12
Click
OK
, and then click
Close
.
Additional printer setup
63
Содержание hn1
Страница 125: ...3 Connect the answering machine or telephone to the adapter Answering machine Telephone Faxing 125...
Страница 240: ...3 Remove the jam 4 Close the rear door 5 Close the front door 6 Touch Continue Clearing jams 240...
Страница 246: ...4 Remove the separator roll 5 Remove the jammed paper 6 Reinstall the separator roll Clearing jams 246...
