Fax Station Number not set up
The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch
Continue
to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Insert Tray <x>
Insert the specified tray into the printer.
Install Tray <x>
Try one or more of the following:
•
Install the specified tray:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded outlet.
5
Restart the printer.
•
Cancel the current job.
Invalid PIN
Enter a valid PIN.
Load <src> with <x>
<src> is a tray or feeder, and <x> is a paper type or size.
Try one or more of the following:
•
Load the specified paper in the tray.
•
Touch
Continue
to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
•
Cancel the current job.
Troubleshooting
252
Содержание hn1
Страница 125: ...3 Connect the answering machine or telephone to the adapter Answering machine Telephone Faxing 125...
Страница 240: ...3 Remove the jam 4 Close the rear door 5 Close the front door 6 Touch Continue Clearing jams 240...
Страница 246: ...4 Remove the separator roll 5 Remove the jammed paper 6 Reinstall the separator roll Clearing jams 246...
