Solving fax problems
Caller ID is not shown
Contact your telecommunications company to verify that your telephone line is subscribed to the caller ID service.
If your region supports multiple caller ID patterns, you may have to change the default setting. There are two settings
available: FSK (pattern 1) and DTMF (pattern 2). The availability of these settings by way of the Fax menu depends on
whether your country or region supports multiple caller ID patterns. Contact your telecommunications company to
determine which pattern or switch setting to use.
Cannot send or receive a fax
These are possible solutions. Try one or more of the following:
E
NABLE
THE
FAX
FUNCTION
For more information, see “Setting up the printer to fax” on page 118.
C
HECK
THE
DISPLAY
FOR
ERROR
MESSAGES
Clear any error messages.
C
HECK
THE
POWER
Make sure the printer is plugged in, the power is on, and
Ready
appears.
C
HECK
THE
PRINTER
CONNECTIONS
Make sure the cable connections for the following hardware are secure, if applicable:
•
Telephone
•
Handset
•
Answering machine
C
HECK
THE
TELEPHONE
WALL
JACK
1
Plug a telephone into the wall jack.
2
Listen for a dial tone.
3
If you do not hear a dial tone, then plug a different telephone into the wall jack.
4
If you still do not hear a dial tone, then plug a telephone into a different wall jack.
5
If you hear a dial tone, then connect the printer to that wall jack.
Troubleshooting
272
Содержание hn1
Страница 125: ...3 Connect the answering machine or telephone to the adapter Answering machine Telephone Faxing 125...
Страница 240: ...3 Remove the jam 4 Close the rear door 5 Close the front door 6 Touch Continue Clearing jams 240...
Страница 246: ...4 Remove the separator roll 5 Remove the jammed paper 6 Reinstall the separator roll Clearing jams 246...
