Ricoh G091, Руководство по обслуживанию

Страница: 85 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
SM 5-3 G112/G113/G116/G094/G095/G091
Service
Tables
5.3 PRINTER ENGINE SERVICE MODE [ALL MODELS]
5.3.1 SERVICE MODE TABLE
Notation What it means
[range / default / step] Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range
±
9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with
each key press.
italics Comments added for reference.
DFU Denotes “Design or Factory Use”. Do not change this value.
Japan only The feature or item is for Japan only. Do not change this
value.
SP1-xxx: Feed
Regist sag 1003
Adjusts the relay clutch timing at registration. Relay clutch timing determines
the amount of paper buckle at registration. (A “+” setting causes more
buckling.)
1003 1 Cassette [–8 mm ~+8 mm/ 0/ 2 mm step]
1003 2 Multi tray [By-pass] [–8 mm ~+8 mm/ 0/ 2 mm step]
1003 3 Duplex Tray [–8 mm ~+8 mm/ 0/ 2 mm step]
Fusing control Normal , Phase control 1104
Use phase control if the room lights flicker when the fusing lamp starts.
Defaults: North America – Normal (On/off control), Europe – Phase
Fusing Temp. 1105
Adjusts the fusing temperatures for printing and standby mode.
Fusing temp
[150 ~ 200/ 170 / 5 deg.] DFU 1105 1
Adjusts the fusing temperature for printing on normal paper.
Fusing T Stand
[140 ~ 175 / 168 / 1 deg.] DFU 1105 2
Adjusts the fusing temperature for standby mode.
1106 Fusing T Display
1106 1 Displays the current fusing temperature.
G112 Series: 1 = 1 rotation, 2 = 2 rotations OHP clutch rt
G116 Series: 1 = 1 rotation, 2 = 2 rotations
1902
Selects the number of rotations for the bypass feed roller when the paper type
is set to “Transparencies”.
If jams occur when transparencies are being used, change the setting to 2.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA