Ricoh G091, Руководство по обслуживанию

Страница: 118 / 298

NVRAM DATA UPLOAD/DOWNLOAD [G113/G116]
G112/G113/G116/G094/G095/G091 5-36 SM
5.11 NVRAM DATA UPLOAD/DOWNLOAD [G113/G116]
CAUTION
Turn off the main power switch before you insert or remove an SD card.
Make sure that the controller and the EGB are correctly connected.
Uploading NVRAM Data
Copy the data from the NVRAM to an SD card (referred to as “to upload
NVRAM data” in this section) before you replace the NVRAM. If you cannot
upload NVRAM data, manually input the necessary settings after you replace
the NVRAM
1. Start the SP mode.
2. Select SP 5990 1 (ALL).
3. Do the SP.
4. See if the SMC Report is correctly output.
NOTE: You may need the SMC Report when the machine did
not complete an NVRAM data upload or download (
Downloading NVRAM Data) correctly.
5. Go out of the SP mode.
6. Turn OFF the main power switch.
7. Insert an SD card into the upper slot [A] (slot 1)
8. Turn ON the main power switch.
9. Start the SP mode.
10. Select SP 5824 1 (NVRAM Upload).
11. Push the enter key. The upload starts.
NOTE: When uploading ends correctly, the following file is made:
•
NVRAM\serial_number.NV where “NVRAM” is the folder name in the SD
card and “serial_number.NV” is the file name with the extension “.NV”. The
serial number of the printer is used as the file name. For example, if the serial
number is G1160017, the file name is “G1160017.NV”.
12. Go out of the SP mode.
13. Turn OFF the main power switch.
14. Remove the SD card.
15. Mark the SD card with, for example, the machine code. You need this SD card
when you download NVRAM data ( Downloading NVRAM Data).
NOTE: One SD card can store the NVRAM data from two or more machines.
G116S511.WMF
[A]
⇒
Rev. 09/2005
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA