Ricoh G091, Руководство по обслуживанию

Страница: 69 / 298

IMAGE ADJUSTMENT
SM 3-29 G112/G113/G116/G094/G095/G091
R
ep
lac
em
en
t
Adjus
tm
ent
3.16 IMAGE ADJUSTMENT
3.16.1 REGISTRATION ADJUSTMENT [ALL MODELS]
The image registration is adjusted using the User Program Mode menu
“Maintenance-Registration”. See the Printer Reference guide, “Making Printer
Settings with the Control Panel-Maintenance Menu” for more details.
3.16.2 PARALELLOGRAM IMAGE ADJUSTMENT
[ALL MODELS]
If a parallelogram image (see example below) is printed while adjusting printing
registration, use the following procedure.
Examples of parallelogram images
NOTE: Use the scanner positioning pin (P/N: A0069104) for the adjustment.
1. Remove the upper cover ([G112 Series] 3.3.2, [G116 Series] 3.3.3)
2. Put the positioning pin into one of the two positioning holes on the laser unit,
depending upon the image adjustment required.
3. Loosen the four screws and move the laser unit.
4. Tighten the laser unit.
5. Print the trimming area pattern to check the image alignment. If a parallelogram
still exists, repeat steps 3 to 5 until image squareness is achieved. (If you
cannot achieve image squareness using one positioning hole, try repeating this
procedure using the other positioning hole.)
(a) (b)
G094R533.WMF
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA