Ricoh G091, Руководство по обслуживанию

Страница: 112 / 298

UPDATING THE FIRMWARE
G112/G113/G116/G094/G095/G091 5-30 SM
5.4.2 ENGINE FIRMWARE [G091/G094/G095/G112]
NOTE: There is only one Engine Firmware card.
1. Prepare a card that contains the required firmware.
2. Turn off the power and remove the cover [A] (1 screw).
3. Insert the card [B] into the card slot [C].
4. Open the front door and then turn on the power.
NOTE: Opening the front door during the engine firmware procedure prevents
overheating in the fusing unit.
5. Push the “Online Key” when “Engine” is displayed.
6. The firmware download is finished when “Updated” is displayed.
7. After the firmware download has finished, turn off the power and remove the
card.
8. Close the front door and then replace the cover [A].
9. Turn on the power, and print the service summary report to confirm that the
new firmware version has been installed.
5.4.3 TYPE OF FIRMWARE
[G113/G116]
G113/G116 models use an SD card to update the firmware. The table below lists
the programs used by the machine. All programs can fit on to one SD card.
Type of firmware Function
Location of
firmware
Message shown
1 Engine - Main Printer engine control SD card Engine
2 System Printer system management SD card Onboard SYS
3 Printer Application Feature application SD card Onboard Prt
4 Network support Network application SD card Network support
5 Web support Web service application SD card Web support
[G112]
An IC card is used to update the firmware on the G112.
The Controller/NIB firmware includes three types of firmware:
* Card 0: Platform & Rescue
* Card 1: Printer
* Card 2: Web Support
Use the cards in numerical order starting from card 0, then card 1 and then
card 2.
There is only one Engine Firmware card.
⇒
Rev. 09/2005
⇒
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA