Ricoh G091, Руководство по обслуживанию

Страница: 84 / 298

PRINTER CONTROLLER SERVICE MODE [ALL MODELS]
G112/G113/G116/G094/G095/G091 5-2 SM
Exiting Service Mode
Select “3. End” from the service mode main menu, then press the “Enter” key.
NOTE: To make the settings effective, turn the main switch off and on after exiting
service mode.
5.2 PRINTER CONTROLLER SERVICE MODE [ALL
MODELS]
5.2.1 SERVICE MODE MENU (“1. SERVICE MENU”)
Service
Mode
Description Function
1001 Bit Switch
Adjusts bit switch settings.
Note: Currently the bit switches are not being used except
for Bit Switch 2 bit 3. See PUB(C)-051 for details.
1003 Clear Setting Initializes settings in the “System” menu of the user mode.
1004 Print summary
Prints the service summary sheet (a summary of all the
controller settings).
1005 Disp Version Displays the version of the controller firmware.
5.2.2 BIT SWITCH PROGRAMMING
NOTE: Currently the bit switches are not being used except for Bit Switch 2 bit 3.
See PUB(C)-051 for details.
1. Enter the SP mode, select “Service Menu”, then press
[Enter] twice.
2. Select #1, #2, #3, or #4 for the desired bit switch, then
press [Enter].
•
[

] [

]: Move to the next switch.
3. Adjust the bit switch using the following keys.
•
[

] [

]: Move to the next bit.
•
[Escape]: Exit without saving changes.
•
[Enter]: Exit and save changes.
NOTE: The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.
Service Menu
BitSW
BitSW
<BitSW#1>
Sw#1 00000000
Bit0 _
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA