Ricoh G091, Руководство по обслуживанию

Страница: 113 / 298

UPDATING THE FIRMWARE
SM 5-31 G112/G113/G116/G094/G095/G091
Service
Tables
5.4.4 PRECAUTIONS [G113/G116]
Handling SD Cards
Observe these precautions when you handle SD cards:
•
Turn off the main power switch before you insert or remove an SD card. Data in
the SD card can get corrupted if you insert or remove an SD card while the main
power switch is on.
•
Do not turn off the main power switch during downloading.
•
Keep SD cards in a safe location. Do not store SD cards in these locations:
•
Locations that get high temperature, high humidity, direct sunlight, or strong
vibration.
•
Locations where there are effects from magnetic forces
•
Do not bend or scratch SD cards.
•
Do not drop SD cards or expose them to shock or vibration.
Upload or Download
In this section “upload” and “download” have these meanings:
•
Upload: To copy data from the printer to the SD card
•
Download: To copy data from the SD card to the printer
Network Connection
Before you start, tell the user that they cannot use the printer during firmware
update, and that they must disconnect the printer physically from the network. If a
print job comes in, this can cause problems with the firmware update.
5.4.5 MACHINE FIRMWARE [G113/G116]
NOTE: 1) Turn the machine off before you start the firmware update procedure.
2) This procedure will let you upgrade all programs for this machine.
1. Prepare a card that contains the
required firmware.
2. Turn off the power and remove the
cover [A] (1 screw).
3. Insert the card into the upper card slot
[B] (slot 1).
4. Turn ON the power.
NOTE: It takes about 30 seconds before
you will see anything on the
operation panel. “Onboard Sys”
shows after 30 seconds.
5. Scroll to the program you want to
upgrade (Example; Engine). Then
press “enter”
G116S510.WMF
[A]
[B]
⇒
Rev. 09/2005
⇒
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA