Ricoh G091, Руководство по обслуживанию

Страница: 87 / 298

PRINTER ENGINE SERVICE MODE [ALL MODELS]
SM 5-5 G112/G113/G116/G094/G095/G091
Service
Tables
SP2-xxx: Drum
Charge rol bias [1000 ~ 2000 / –1700V / 10V step] DFU 2001
G112
Series
Only
Adjusts the voltage applied to the charge roller for printing.
Charge rol bias [1000 ~ 2000 / –1675V / 10V step] DFU 2001
G116
Series
Only
Adjusts the voltage applied to the charge roller for printing.
Mainscan mag [-0.5% ~ 0.5% / 0 / 0.1% step] 2112
Adjusts the main scan magnification.
Subscan mag [-0.5% ~ 0.5% / 0 / 0.1% step] 2113
Adjusts the sub scan magnification.
Developer bias [200 ~ 800 / 750V / 10V step] DFU 2201
Adjusts the development bias for printing.
Toner end count [50 ~ 200 / 200 / 50 sheets/step] 2213
Adjusts the number of prints the machine can make after it detects toner near-
end.
Transfer curr
[-2 ~ 4 / 0 / 2 µ A/step]
2301
Adjusts the correction current applied to the transfer roller.
2902 Test Pattern
Printing Test Pattern
No specified
Various test patterns
Selects a printer test pattern. After selecting a pattern, the display
automatically goes to SP 5902. Use SP 5902 to print either one test pattern
(5902-1) or a few of them (5902-2).
Reset SP 2902 to “no specified” after
printing the test pattern, or the selected pattern will appear on every page
printed by the user.
Thermistor adj Yes , No DFU 2910
If this is “Yes”, the machine automatically adjusts the charge roller voltage and
transfer current in response to the temperature within the machine.
Toner end clear Execute DFU 2928
Clears the toner end counter in the engine board. Not used in this machine.
Waste toner cnt 2980
Displays the waste toner counter in the engine board.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA