Ricoh DD 5450, Руководство по обслуживанию на месте, Страница: 371 / 403

369
８
Chapter 8 HELP Mode Function and Operation Procedures
Page 1:
● Setting functions
Interlock, Paper feed error (signal jam), Document detection ,Document remain monitor, Paper
type
The first print : printing / JOG / speed 0 The second print : printing / JOG / speed 0 / speed 1
Setting when entry paper "0",Setting when entry paper " more than 1",Drum master detection
sensor, switches ,Operations
Page 2:
● Setting functions
● Operation procedure
Function Setting
(3 pages in total)
HELP-061
2.
Function Setting (Display : Page 1)
1.
Call the HELP mode “H-061”.
0 1 1 1 0 0 1 0
A B C D E F G H
1.
HELP-061
HELP-061
1 1 0 0 1 1 1 1
2.
1 1 1 1 1 1 1 1
3.
1 1 1 1 1 1 1 1
4.
0 1 1 1 0 0 1 0
A B C D E F G H
1.
1 1 0 0 1 1 1 1
2.
1 1 1 1 1 1 1 1
3.
1 1 1 1 1 1 1 1
4.
0 1 1 1 0 0 1 0
A B C D E F G H
1.
1 1 0 0 1 1 1 1
2.
1 1 1 1 1 1 1 1
3.
1 1 1 1 1 1 1 1
4.
Touch and Enter
Enter “ 061 ” by the NUMERIC keys and then press the
PRINT key.
Setting
1. Select and touch the item to be set.
2. Use the "0" and "1" numeric keys to enter
binary value for the desired correction value.
3. Press the
X
=
key to store the set value.
► Setting function
Item Value Setting
1
A
0 Touch panel calibration, 2 places (Default)
1 Touch panel calibration, 3 places
B
0
Thermal head energy temperature correction
disabled
1
Thermal head energy temperature correction
enabled (Default)
C
0 Inter lock disabled
1
Inter lock enabled (Default):
Emergency stop while enabled
D
0 Stop at the first paper feed error (signal jam)
1 Stop at the second paper feed error (signal jam) (Default)
E
0 -
1 -
F
0
Document remain monitor (to detect the presence of the
document on the glass after printing) disabled (Default)
1
Document remain monitor (to detect the presence of the
document on the glass after printing) enabled
G
0 Paper type setting is not stored.
1 Paper type setting is stored. (Default)
H
0
After printing, each setting is not initialized to "initial configu -
ration". (default/memory) (Default)
1
After printing, each setting is initialized to "initial configura -
tion". (default/memory)
3