Ricoh DD 5450, Руководство по обслуживанию на месте, Страница: 321 / 403

319
８
Chapter 8 HELP Mode Function and Operation Procedures
● Check operation.
CLAMP MOTOR
● Checking sensors.
CLAMP SENSOR 1 / CLAMP SENSOR 2
1.
● Operation procedure
Adjusting/Checking the Clamp Section
HELP-012
CLAMP SECTION
Call the HELP mode “H-012”.
2.
Checking sensors.
Check the following sensors.
► Status of Sensors
Sensors 0 1
CLAMP SENSOR 1 Photopassing Photointerrupting
CLAMP SENSOR 2 Photopassing Photointerrupting
0 :CLAMP SENSOR 1
1 :CLAMP SENSOR 2
CLAMP MOTOR
Check operation.
3.
1. Press the PRINT POSITION key: while this key is
held down, the clamp motor operates.
Press the PRINT POSITION key: toward B mode.
Press the PRINT POSITION key: toward C mode.
HELP-012
● Press the center key to return to the clamp home position, B mode.
2. Press the MASTER MAKING key.
B mode is entered. Then drum rotates and stops at the detach position
and then at the attach position.
3. Press the " 1" key. Every time this key is pressed, the drum rotates and stops at the detach position.
Press the " 2" key. Every time this key is pressed, the drum rotates and stops at the attach position.
Press the " 3" key. Every time this key is pressed, the drum rotates and stops at the removal position.
Press the " 4" key. Every time this key is pressed, the drum rotates and stops at the pre-detach position.
Press the " 5" key. Every time this key is pressed, the drum rotates and stops at the post-detach posi tion.
Press the " 8 " key: B mode Press the " 9 " key: C mode
Toward B mode Toward C mode
HELP-012
HELP-012
4.
Return to the HELP mode.
B mode
Press the
STOP
key. The HELP mode selection display will reappear.
Enter “ 012 ” by the NUMERIC keys and then press the
PRINT key.
→ To exit the HELP mode : Turn the power switch OFF.
→ To access another HELP mode : Enter the desired mode number
using the numeric keys.
CLAMP SECTION
CLAMP MOTOR
0 :CLAMP SENSOR 1
1 :CLAMP SENSOR 2
CLAMP SECTION
CLAMP MOTOR
0 :CLAMP SENSOR 1
1 :CLAMP SENSOR 2
CLAMP SECTION
CLAMP MOTOR
0 :CLAMP SENSOR 1
1 :CLAMP SENSOR 2
3