Ricoh DD 5450, Руководство по обслуживанию на месте, Страница: 302 / 403

300
８
Chapter 8 HELP Mode Function and Operation Procedures
Checking/Adjusting Print Speed.
● PRINT SPEED
● JOG SPEED
● M-MAKE SPEED
● PRESTOP SPEED(0-6)
Speed higher than 150rpm is for factory use only.
● Operation procedure
(1) Checking/Adjusting Print Speed
(3 pages in total)
HELP-003
SPEED ADJUSTMENT
PRESTOP SPEED
M-MAKE SPEED
JOG SPEED
PRINT SPEED
Call the HELP mode “H-003”.
HELP-003
Enter “ 003 ” by the NUMERIC keys and then press the
PRINT key.
Select the speed.
Select the speed to be checked on the touch panel.
1.
2.
Check the speed.
Press the MASTER MAKING key. The drum rotates and the
rotation speed appears on the panel lower part.
3.
4.
Check the speed. (See the next page for speed reference values.)
HELP-003
To change the speed (0 to 6)
1. Select and touch PRINT SPEED key.
2. Change the speed by the PRINT SPEED keys on the panel.
5
rpm
HELP-003
5
rpm
Press the MASTER MAKING key. The drum rotates and the rotation
speed appears on the panel lower part.
To adjust the speed while the drum is rotating:
1. Select and touch the speed to be adjusted.
2. Every time the PRINT POSITION keys are pressed:
● Press the C (clear) key to return the set speed to
the default.
3. Press the
X
=
key to store all set speed values.
Press the STOP key to stop the drum at the stop position.
● The drum does not rotate even if the
drum removal button is pressed.
Step
5.
→ Press the STOP key. The HELP mode selection display will reappear.
The speed of the selected
item displayed
Speed is increased by 1 rpm.
Speed is decreased by 1 rpm.
PRESTOP SPEED
M-MAKE SPEED
JOG SPEED
PRINT SPEED
SPEED ADJUSTMENT
SPEED ADJUSTMENT
PRESTOP SPEED
M-MAKE SPEED
JOG SPEED
PRINT SPEED
SPEED ADJUSTMENT
PRESTOP SPEED
M-MAKE SPEED
JOG SPEED
PRINT SPEED
The speed of the selected
item displayed
3