Ricoh DD 5450, Руководство по обслуживанию на месте, Страница: 339 / 403

337
８
Chapter 8 HELP Mode Function and Operation Procedures
● Printing the Test Pattern.
(1) Test Pattern
HELP-030
TEST PATTERN
TEST PATTERN 1
TEST PATTERN
2
TEST PATTERN
3
TEST PATTERN
4
TEST PATTERN 5
TEST PATTERN 6
TEST PATTERN 7
1.
● Operation procedure
Call the HELP mode “H-030”.
Enter “ 030” by the NUMERIC keys and then press the PRINT
key. The test pattern selection display appears.
2.
Select test pattern.
HELP-030
HELP-030
● Turn off the power or make a reset to exit from this mode.
● To change the test pattern, enter HELP-030 again.
● The master size is the size of the paper selected.
edge 210 mm
edge 182 mm
edge 8 mm
edge 7 mm
100 mm
100 mm
200 mm
400 mm
edge 10 mm
Test Pattern 1 :When using A3 Machine and A3 Drum
● The test pattern consists of the diagonal line pattern,
the maximum width (horizontal) lines at 7 mm, 8
mm,182 mm and 210 mm from the lead edge.
The square {200 (horizontal) × 400 (vertical) mm}
and lines dividing this squares (100×200 each).
100 mm
200 mm
Set to “4. B = 0: Upper cover switch disabled” and
“4. C =0: Scanner disabled” of HELP-061.
The Test Pattern can be made up and printed with the scanner
opened.
HELP-029 unused
TEST PATTERN
TEST PATTERN
1
TEST PATTERN
2
TEST PATTERN
3
TEST PATTERN
4
TEST PATTERN 5
TEST PATTERN 6
TEST PATTERN 7
TEST PATTERN
TEST PATTERN
1
TEST PATTERN
2
TEST PATTERN 3
TEST PATTERN 4
TEST PATTERN 5
TEST PATTERN 6
TEST PATTERN
7
1. Select and touch the test pattern to be printed. HELP
automatically exits and the standby screen for making
master and printing appears to make up the test pattern.
3