Ricoh DD 5450, Руководство по обслуживанию на месте, Страница: 26 / 403

２
24
Chapter 2 Machine Installation
Jump plate lever Jump plate lever
Inward for narrower paper
than 210 mm
Outward for extremely heavy weight
paper or wider paper than 297 mm
● When you use extremely heavy weight
paper, set the “jump plate levers” outward.
● When you use wider paper than 297 mm, set
the “jump plate levers” outward.
● When you use narrower paper than 210 mm,
set the “jump plate levers” inward.
REFERENCE
1. Plug the supplied power cord into the inlet on
the machine.
(3) Turning the Power Switch ON
2. Connect the ground wire and plug the other
end of the power cord into an outlet.
Male plug of
the power
supply cord
Outlet
● Insert the power cord plug firmly into
the socket, so that proper electrical
contact is effected. If grounding is
imperfect and electrical leakage occurs,
fire or electric shock could result.
WARNING
1
2.1 Adjust the jump plates on both sides to the
A3/B4/A4 position.
2.2 Adjust the jump plates according to the paper
size.
When moving the “jump plate levers” from the
A3/B4/A4 position, move them while holding
them up.
2. Attaching the Jump Plates