Ricoh D093 Скачать руководство пользователя страница 93

Страница: 93 / 779

Main Machine Installation (D093/D094)

SM 3-15

D093/D094

Inst

allation

The guide plate and screws are provided as accessories with either the Roll

Feeder (D503/D504) or Table (B854).

16. Install the guide plate [1] (

x 2 Blue). Hang the hooks on each end; this puts the plate in

the correct position to be installed.

The movable guide plates are provided as accessories with either the Roll Feeder

(D503/D504) or Table (B854).

17. Attach the movable guide plates [1] (x6).

Each plate is the same. It is not possible to install a plate in the incorrect position.

Attach each plate with the ribbed side down.

Move the hinges [2] a small distance apart. This allows the tabs to attach easily into the

holes.

18. Lift each plate and let it fall, to make sure that they move smoothly on the hinges.

19. Reattach the manual feed table.

20. Reattach the left and right covers.

The flat-head screw must be attached at the rear side of each cover.

21. Close the upper unit.

Содержание D093












































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D093

Отзывы:

Бренды по названию

Популярные бренды

Ricoh D093, Руководство по обслуживанию

Результаты поиска

Содержание D093

Отзывы:

Бренды по названию

Популярные бренды