Ricoh D093 Скачать руководство пользователя

Страница: 151 / 779

Installation of MFP Options

SM 3-73

D093/D094

Inst

allation

3.9.2 ENABLING THE ONBOARD FEATURES

The network and USB support features are built into the GW controller board. However, these

features cannot be used until they have been enabled with SP5985 (Device Setting). Before

installing any other options in this section, do SP5985 and make sure each item is set to "1".

SP5985-001. Must be set to "1" to enable the network functions.

SP5985-002. Must be set to "1" to enable the USB function.

3.9.3 USING SD CARDS

Removing the SD Card Slot Cover

The SD card slot cover [1] is fastened by one screw. Remove this cover to insert SD cards.

Always reattach this cover after removing or inserting SD Cards.

Restrictions and Precautions on the Use of SD Cards

Always touch a grounded surface to discharge static electricity from your hands before you

handle SD cards.

When an application is moved from one SD card to another SD card, the authentication

data is moved with the application program to the target SD card.

Do not use an SD card if it has been used with a computer or other device. (The SD card

may not operate correctly.)

The original SD card received with purchase of the application program is the only

evidence that the customer is licensed to use the application. For this reason, the original

SD card should be stored at the work site as proof of purchase by the customer. Also, the

service technician may occasionally need to check the dates and version numbers SD

cards during troubleshooting.

After an SD card has been used to combine applications on one card, it cannot be used for

any other purpose.

Always make sure that the write-protect switch is OFF before uploading data to an SD card.

Содержание D093












































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D093

Отзывы:

Похожие инструкции для D093

Бренды по названию

Популярные бренды

Ricoh D093, Руководство по обслуживанию

Результаты поиска

Содержание D093

Отзывы:

Похожие инструкции для D093

Бренды по названию

Популярные бренды