Ricoh D093, Руководство по обслуживанию

Страница: 329 / 779

Main SP Modes
SM 6-21 D093/D094
Syste
m
Ma
in
te
na
n
ce
Ref
eren
ce
Default Voltages for Different Media
Paper
A B C D
2301 uA 2301 uA 2301 uA 2301 uA
Plain: Roll -001 60 -002 60 -003 60 -004 60
Translucent: Roll -006 60 -007 60 -008 60 -009 60
Film: Roll -011 80 -012 80 -013 80 -014 80
Plain: Cut Sheet -021 60 -022 60 -023 60 -024 60
Translucent: Cut
Sheet
-026 60 -027 60 -028 60 -029 60
Film: Cut Sheet -031 80 -032 80 -033 80 -034 80
ƒ The four voltages applied to the paper for image transfer can be adjusted at each area,
depending on what type of paper is used.
ƒ Note that the default voltages are slightly higher for Roll Film and Cut-Sheet Film.
ƒ SP2301 sets the voltage levels. The timing for the application of the voltages is controlled
by SP2925.
1
Roll Paper: Plain Paper: Before Leading Edge
[0 to 230/60/1 A]
2
Roll Paper: Plain Paper: Leading Edge
[0 to 230/60/1 A]
3
Roll Paper: Plain Paper: Image Area
[0 to 230/60/1 A]
4
Roll Paper: Plain Paper: Trailing Edge
[0 to 230/60/1 A]
5 Roll Paper: Plain Paper: Coefficient
DFU
Adjusts the transfer output coefficient for the image at the center, leading edge,
and trailing edge on plain roll paper.
[1 to 2 / 1/ 0.1 ]