Ricoh D093, Руководство по обслуживанию

Страница: 527 / 779

SP1-xxx Feed
SM Appendix 2-5 D093/D094
Appe
ndix:
SP
Mode
Ta
b
le
s
5 Feed Motor : Cut Paper Tray DFU
[-30 to +30/0/1]
For every change of "1", speed is adjusted approximately 0.094%.
6 Main Motor DFU
[-80 to +80/0/1]
For every change of "1", speed is adjusted approximately 0.04%.
7 Fusing Motor DFU
[-100 to +100/7/1
For every change of "1", speed is adjusted approximately 0.054%.
1910 Motor Speed Adjustment
This SP adjusts the speed of the roll feed motor for feeding plain roll paper,
translucent roll paper, and film roll paper.
1 Feed Motor: Roll: Plain Paper [-100 to 100 / -10 / 1]
2 Feed Motor: Roll: Translucent Paper [-100 to 100 / 0 / 1]
3 Feed Motor: Roll: Film [-100 to 100 / -10 / 1]
1911 By-pass Feed Start Timing
Adjusts the time that the operator has to adjust the paper skew manually when
feeding paper manually from the bypass tray..
[1.0 to 8.0/2.0/0.1 sec.]
1912 Registration (Main Motor) Motor Speed-up
This SP can increase the speed of the main motor just before the trailing edge of
the paper leaves the nip of the registration rollers.
ƒ Normally, the speed of the fusing roller is slightly faster than the speed of
the registration roller in order to pull the paper taut and stabilize paper feed.
ƒ However, this small difference in speed between the rollers can cause jitter
when the trailing edge of the paper leaves the nip of the registration rollers.