Ricoh D093 Скачать руководство пользователя страница 505

Страница: 505 / 779

Energy Save

SM 8-1

D093/D094

Energy

Saving

8. ENERGY

SAVING

8.1 ENERGY SAVE

8.1.1 ENERGY SAVER MODES

Customers should use energy saver modes properly, to save energy and protect the

environment.

The area shaded grey in this diagram represents the amount of energy that is saved when the

timers are at the default settings. If the timers are changed, then the energy saved will be

different. For example, if the timers are all set to 240 min., the grey area will disappear, and no

energy is saved before 240 min. expires.

Timer Settings

The user can set these timers with User Tools (System settings > Timer setting)

Panel off timer (10 sec – 240 min): Panel Off Mode. Default setting: 60 sec.

Energy saver timer (1 – 240 min): Low Power Mode. Default setting: 7 minute

Auto off timer (1 – 240 min): Off/Sleep Mode. Default settings: 14 min.

Normally, Panel Off timer < Energy Saver timer < Auto Off timer. But, for example, if Auto Off

timer < or = Panel Off timer and Energy Saver timer, the machine goes immediately to Off mode

when the Auto Off timer expires. It skips the Panel Off and Energy Saver modes.

Содержание D093












































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D093

Отзывы:

Бренды по названию

Популярные бренды

Ricoh D093, Руководство по обслуживанию

Результаты поиска

Содержание D093

Отзывы:

Бренды по названию

Популярные бренды