Ricoh D093, Руководство по обслуживанию

Страница: 557 / 779

SP1-xxx Feed
SM Appendix 2-35 D093/D094
Appe
ndix:
SP
Mode
Ta
b
le
s
1948 Press Roller Inching Target Temp
This SP determines when inching starts.
ƒ Inching control is done when the pressure roller temperature is above this
setting (65
o
C for example), but printing is prohibited until the pressure roller
temperature reaches its target temperature.
ƒ Inching (idle rotation of the rollers) starts after the temperature rises above
the hot roller target temperature (SP1937 003).
ƒ While the temperature is below 65
o
C copying (not printing) is possible before
the temperature of the pressure roller reaches its target temperature and
inching starts.
1 Plain: Mode1 [60 to 180/100/5
o
C]
2 Plain: Mode2 [60 to 180/65/5
o
C]
3 Plain: Mode3
[60 to 180/60/5
o
C] 4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1 [60 to 180/130/5
o
C]
7 Trans.: Mode2 [60 to 180/100/5
o
C]
8 Trans.: Mode3
[60 to 180/60/5
o
C]
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
16 Plain Mode: Low Temp Cold Start
When the machine determines that a cold start in a low-temperature environment