Richiger E6910, Руководство оператора

Страница: 15 / 55

08
Ground conditions were evaluated before bagging the grain. If terrain was not previously prepared it can be loose. The wheels
could hit potholes under the bag and tilt to one side.In case the ground is loose, machine height can be increased with
hydraulic cylinder. If there are potholes, they can be filled with soil or covered with elements such as bricks or planks as the
machine advances and lifts the bag off the ground, leaving the holes visible.
Ground conditions
DANGER
1
2
Initiating labours
From transport
to work position
Fig.9
Fig.8
Fig.10
Fig. 5 Fig. 6
Fig. 7 Fig. 8
At no time during the unloading operation should anyone, except the operator standing at the hydraulic
controls, approach unloader or bag, and that includes both tractor and truck drivers. Onlookers should keep a
safe distance. And never allow anyone to lean against the bag: augers are turning inside.
Haul the machine to where extraction will take
place. When transporting the machine, the
discharge auger must always lie horizontal over
its support stand (Fig. 5) to prevent damage.
The hydraulic cylinder that determines height
clearance must be raised a to its maximum
position to prevent the cross augers from making
contact with the ground. The cylinder shaft must
be fitted with the aluminum stops provided so
that the weight of the machine rests upon them
(Fig. 6).
Before unhitching the unloader, place the front
located screwjack in vertical position (Figs. 7 &
8).
05
06