Richiger E6910, Руководство оператора

Страница: 26 / 55

919
Fig. 40
Fig. 41
22
2
IMPORTANT
There is no need to be overly precise when fastening the bag to the roller. Even though at this stage the plastic may look
crumpled and in disarray, it will stretch and straighten after a few turns of the roller. The basic consideration here is having
thebottom part of the bag (the part hooked to the roller first) hold some slack relative to the upper part attached last (one or
two feet is enough). The latter should be attached shorter so that the roller tugs at it first. The small margin of slack in the
bottom section plus the plastic sheet's elasticity helps form a rounded shape that contains the grain as the bag is rolled in.
The rounded shape also helps keep adequate clearance between bag and sweep augers.
Pull lever "C" to its upward position (Fig.
27) and rotate roller forward about one turn,
or whatever is needed for the plastic sheet
to achieve initial tension (Fig. 40). Then
lower lever "C" to neutral position. Ensure
cutting blade has adequate height
clearance to cut through the upper half of
the bag (Fig. 41).