Richiger E6910, Руководство оператора, Страница: 35 / 55

28
Back to transport mode
Fig.55
Go forward with tractor and unloader until all
of the used plastic is released from the
roller and lies on the ground (Fig. 55).
Reverse the order of previous steps to set up the machine for transport:
a) Raise hydraulic cylinder to its maximum height, clamp all the stops on the cylinder rod and
lower again to rest machine on stops. It is important to set highest clearance for the road.
b) Fold the discharge auger.
c) Disconnect hydraulic hoses and remove PTO drive shaft.
d) Turn cutter blade round so cutting edge faces inward.
e) Hitch unloader to towing vehicle.
08