Richiger E6910, Руководство оператора

Страница: 13 / 55

06
CAUTION
After connecting the hoses, check that they are not left so short that the bagger cannot maneuver without pulling at
them, nor too long that there is risk of them snagging a machine part.
Before connecting hoses to tractor: stop tractor engine
and depressurize hydraulic circuit by moving control lever in
both directions. Remove female plugs (Fig. 3, “B”) and wipe
clean coupling ends before connecting.
Before disconnecting hoses from tractor: stop tractor
engine and depressurize hydraulic circuit by moving control
lever in both directions. Pull out quick connect couplings and
cover ends with plugs.
The hydraulic cylinder is used to set the machine's inclination angle and working height. Hoses connect to tractor
hydraulic system through 1/2” NPT quick couplings (Fig. 3, “A”).
Fig.3