Ribind K400 230V, Инструкция по эксплуатации

Страница: 35 / 60

code ACG5052
S
PARK ANTENNA
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency of
the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
SPARK ANTENNA 91 code ACG5454
SPARK ANTENNA 433 code ACG5252
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
code ACG7059
F
IT SYNCRO
FIT SYNCRO PHOTOCELLS for the wall-installation - code ACG8026
The range you can set is 10-20m, 30÷60ft.
You can fit many couples close together thanks to the synchronising
circuit.
Add the
SYNCRO TRANSMITTER , code ACG8028, for more than 2
photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
code ACG8051
B
LOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION code ACG1053
BLOCK KEY SELECTOR TO BUILD-IN code ACG1048
M
ECHANICAL STRIP
L=2MT - 6,56 FEET code ACG3010
With double-safety contact, you can cut the length you need.
I
NSTALLATION KIT
for gates weighting up to a 600Kg / 1300lbs code ACG4655
N
YLON RACK MODULE 4
with zinc plated angle Iron, In 1mt. bars.
Ideal for gates up to 1,000Kg / 2,200lbs weight
1mt / 3,28” code ACS9000
10mt / 32,8” (1mt/3,28” x 10) code ACS9001
R
ACK OF MODEL 4
with CATAPHORESIS treatment, right-angle, in 2mt - 6,56 feet bars
code ACS9050
Ideal for gates weighting up to 2200Kg / 4,800lbs.
P
LATE TO BE CEMENTED
code ACG8107
G G
B B
follows from page 34