C O M M A N D S
Switch Commands
350-8794 V1.1
Linx DVI 8x8 Matix Switcher User’s Guide
37
. . . . .
OUT
put
EN
able
<output # | ALL>
<ON | OFF>
Enable or disable one or all outputs. If an output
has been disabled, loading a preset will not re-
enable it; issue an OUTputENable command to
do so.
Example
: To disable all outputs, type:
outen all off
and press
ENTER
.
Enter only the output # or all to display the
current status.
OUT
put
S
ou
RC
e
<output #> <input #>
Enter the output number followed by the number
of the input to be assigned.
Example
: To route input 2 to output 7, type:
outsrc 7 2
and press
ENTER
.
To get the current status for the specified output,
omit the input argument.
ROUTE
<input #> <output #>
Enter the input number followed by the desired
output assignment. An input can be assigned to
one or more outputs.
Example
: To route input 3 to output 4, type:
route 3 4
and press
ENTER
.
To display the current status of an input, omit the
output argument.
Table 4-3
Switch Commands (Continued)
Command
Arguments
Description
