RFD TX Module User Manual
www.rfdesign.com.au
6
Version 1.0 Last update 07/03/2019
3.2.1
Configuration Webpage
Figure 6 Configuration home page
The configuration home page provides basic information on the RF Design TX module, such as
software versions and MAC and IP addresses, as well as links to the various configuration pages. It can
be accessed by directly addressing the IP address of the module, by default in access point (AP) mode
this is 192.168.4.1, in a web browser. Alternatively, it can be accessed by the address http://TXMOD-
XX-XX-XX.local where the Xs are the same as the Xs in the access point network name i.e. the last 6
digits of the MAC address. It should be noted that this will require the installation of some support
software for correct operation, for detail please see section 3.2.2 d) TX module as station.
3.2.2
WiFi Configuration
An active WiFi connection is used to configure the TX Module. On first power up, the TX Module will
default to Access point mode, with SSID of the format
‘
TXMOD-XX-XX-
XX’, where the XX are unique
hexadecimal characters relating to the unit MAC address.
a)
Connect to TX Module Access Point
Use your computer or smart device to search for and connect to the access point WiFi network
generated by the TX Module (use
‘
txmod123
’
as default password). It may be necessary to disable
mobile data on tablets and phones to force the browser to use the TX Module network.
