RF-System TinyGate, Инструкция по сборке и эксплуатации

Страница: 15 / 82

TinyGate - User's manual and assembly instructions
Assembly
Circuit board
Once the preparations are complete, you may proceed with the assembly of
the small parts remaining to be soldered. The parts represented in the follow-
ing figures may be slightly different from those present in the kit.
Once the components have been identified it is necessary to proceed to the local-
isation of their assembly position. The operation is considerably simplified by the
presence of the white silk screen printing on the printed circuit. For this one may
also make reference to the assembly scheme at the end of the table that follows.
Pay particular attention to the precise parallel alignment of the connectors and po-
tentiometers with the edge of the board.
P a g e 15