RF-System TinyGate, Инструкция по сборке и эксплуатации

Страница: 6 / 82

TinyGate - User's manual and assembly instructions
Warnings
Disclaimer
This assembly box is made exclusively for radioamateur and educational-ex-
perimental use. As a result, it should be assembled and used by an expert with
experience in the assembly of electronic circuits.
We do not accept any responsibility for bodily or material damage caused by
the construction and use of this assembly box. As a result, assemble and use
this kit at your own risk.
The operation may not be guaranteed, and even less so its eligibility for use of
certain applications. The user should verify its applicability for their own ap-
plications and is responsible for the latter.
Errors of access and use are factors that are beyond our control, we are there-
fore not responsible for bodily or material harm caused by these errors or in-
experience.
The guarantee applies exclusively to the individual parts (on the condition that
these are assembled correctly) and not to the assembled product. The afore-
mentioned RF-SYSTEM reserves the right to make modifications and/or im-
provements to the assembly box at any time, without updating this manual.
The two kits, once assembled, may not be resold if the necessary legal author-
isations have not been previously requested and obtained.
Before using with a transceiver or receiver, the bridges on
the JP1 socket must be configured correctly.
Incorrect configuration of these bridges may cause damage
to the TinyGate and/or to the connected transceiver or re-
ceiver.
· It is advised that the parts are kept out of reach of children and away from
pets, as they are a choking hazard.
· Do not inhale the fumes from the welding. Use a filter or device to remove
these from the work station.
· Aerate the room after the welding activity.
P a g e 6