RF-System TinyGate, Инструкция по сборке и эксплуатации

Страница: 26 / 82

TinyGate - User's manual and assembly instructions
The transceiver cable
With the assembly kit there is a CAT5-FTP cable provided with a shielded RJ45
connector. If the cable in the kit should have two shielded RJ45 connectors and the
transceiver has a different type of connector, it is then possible to remove one of
these, cutting the cable near the connector. Certain transceivers have a RJ45 type
microphone connector, in this case the cable with two RJ45 may become useful.
The transceiver should be connected to the RJ45 X2 socket via this cable, which
should be set up on the open side (that which faces the transceiver) with a suitable
connector for your transceiver itself. The necessary available signals have been
described in the previous chapter "
Cable for connection to the transceiver ».
P a g e 26