RF-System TinyGate, Инструкция по сборке и эксплуатации

Страница: 78 / 82

TinyGate - User's manual and assembly instructions
The output level may be regulated here via software, but may also
be regulated with the "TX" potentiometer on the front panel. The
software is not advised for use at an output level of 100%. On the
other hand, it would be more indicated to put it at 50% and carry
out the final regulation with the "TX" potentiometer. In any case, it
should be noted that these two regulators are placed in series. This signifies
for example, if you define the output level in the software as 0%, you will not
manage to obtain any signal at the output even if the “TX” potentiometer is set
to the maximum, either in a clockwise direction or the opposite.
When you start HamRadioDeluxe, you will be asked to select the transceiver
model and the relative serial port for the CAT. In the following case, we have
the CI-V/CAT-Port serial port of the TinyGate available as COM7:
P a g e 78