REXROTH MAD100, Руководство по эксплуатации

Страница: 39 / 70

● Connect or disconnect plug connections only in de-energized, dry and
clean state.
● Protect the flange sockets from external force effect.
When motors in ATEX design are used:
Connect an additional protective conductor connection ac‐
cording to the Operating Instructions DOK-MOTOR*-
IDYN*A*EXPD-IB□□-□□-P.
① Flange socket INS480 (view on the plug-in side)
② Flange socket INS380 (view on the plug-in side)
③ Coupling
④ Flange socket
⑤ Only one PTC sensor is applied (spare sensor lines are provided in
the socket housing)
⑥ Holding brake (optional)
⑦ Overall shield connection by clamping the strain relief cable in the
socket
⑧ Connection designations on the Rexroth drive controller
Fig.6-5: Line connection via flange socket; connection diagram
● Ensure the line cross-section required for connecting the
particular motor specified in the Project Planning Manual
Rexroth IndraDyn A.
● Use ready-made Rexroth connection cables; see documen‐
tation
Rexroth Connection Cables IndraDrive and Indra‐
Dyn.
DOK-MOTOR*-MAD/MAF****-IT01-EN-P
Rexroth IndraDyn A Asynchronous Motors MAD / MAF Bosch Rexroth AG 37/67
Assembly