size of the geofence zones are parameters. It is a possibility to state whether
entering in or out of the geofence triggers an asynchronous message
.
AutoGeofencing option can be configured by following parameters visible in
figure 28 below.
Activate
– Enable or Disable AutoGeofence functionality.
Activation TMO
– Time period before Geofence is activated after vehicle stops.
Priority
– Priority of generated event, which will be applied to the saved
record.
Enter Event
– Event generation on Geofence entrance.
Exit Event
– Event generation on Geofence exit.
On Both
– Event generation on Geofence entrance Or exit.
Note that AutoGeofencing does not require entering coordinates, instead it
requires GNSS visibility. If vehicle stopped and activation timeout has passed,
an AutoGeofence will be created around vehicle’s last position with set Radius
value. AutoGeofence event generation works the same as Geofencing
mentioned above.
Figure 28 AutoGeofence configuration
Note
: DB3 Plug&Play operates in GMT:0 time without daylight
saving.