DB3 Plug&Play Configurator is divided into 4 main areas
: 1 – main button
area, 2 – information area, 3 – settings menu, 4 – parameters and values menu.
Main Buttons description:
‘Connect’ – connects device.
‘Load’ – reads configuration parameters from DB3 Plug&Play Flash memory.
‘Save’ – saves configuration parameters to DB3 Plug&Play Flash memory.
‘Load Defaults’ – loads default DB3 Plug&Play settings that later can be
modified. This procedure must be performed before entering new parameters.
‘Save to File…’ – allows the user to save currently entered settings to .XML file,
for later usage.
‘Load from File…’ – allows the user to load configuration saved in .XML
extension file.
‘Reset device’ – reboots DB3 Plug&Play and displays processor firmware
version.
Additional Buttons description:
‘SIM PIN’ – allows the user to enter PIN code if inserted SIM card has activated
PIN code security. Note that PIN code can be entered 2 times. After that SIM
CARD must be removed from DB3 Plug&Play and PIN code entered manually.
‘Add Keyword’ / ‘Change Keyword’ / ‘Switch Security Off’– buttons are used to
protect configurator from unauthorized access to configuration.
The keyword is 4 – 10 symbol length. If the keyword is set, every time user
reconnects DB3 Plug&Play to the USB port, the user will be asked to provide
valid keyword when connecting DB3 Plug&Play to the configurator. The user is
given 5 attempts to enter a keyword. After entering a valid keyword, the
counter resets to 5.
If the user disconnects DB3 Plug&Play using ‘Disconnect’ button and does not
disconnect from the USB port, after reconnecting using ‘Connect’ button,
configurator does not ask for the keyword.