Config attributes
Default
Value
Type
Values
Description
sys.require-https
0
INDEXED_
OPTION
0="Off"
1="On"
Enables the HTTPS-only FLX UC web application. When set to on, the web
application is only accessible via HTTPS, which ensures all web traffic is
encrypted by full 256-bit AES encryption end-to-end. When accessing the
HTTPS web application, the browser may show a security warning, which
must be bypassed. To disable the security warning, this attribute must be
set to Off. When set to Off, the web application is accessible using HTTP.
net.dhcp
1
BOOLEAN
0="False"
1="True"
Enables or disables DHCP. If DHCP is disabled, the Static IP Address, Subnet
Mask, and Default Gateway must be provided in the fields below.
net.ip
TEXT
""
The Static IP Address assigned to the phone.
net.subnet
TEXT
""
Subnet Mask to determine the subnet to which the phone belongs.
net.gateway
TEXT
""
The Default Gateway is the phone's default router on the IP network.
net.dns1
TEXT
""
Address of the primary Domain Name System (DNS) server.
net.dns2
TEXT
""
Address of the secondary DNS server.
net.vlan
2
INDEXED_
OPTION
0="Enabled"
1="Disabled"
2="Automatic"
Specifies VLAN behavior and support for the FLX UC device. 'Automatic'
should be used in environments that provide a Voice VLAN with automatic
detection, in which case the FLX UC will determine the VLAN identifier and
register in that network. If the environment uses Voice VLAN but the Voice
VLAN ID cannot be detected, choose ‘Enabled’ and specify the ID in the
VLAN ID field, net.vlan-id. 'Disabled' switches off VLAN capabilities.
net.vlan-id
TEXT
""
Manually specify a VLAN identifier.
net.ntp1
0.pool.
ntp.org
TEXT
""
Specifies the IP addresses of NTP (Network Time Protocol) servers.
net.ntp2
1.pool.
ntp.org
TEXT
""
Specifies the IP addresses of NTP (Network Time Protocol) servers.
net.ntp3
2.pool.
ntp.org
TEXT
""
Specifies the IP addresses of NTP (Network Time Protocol) servers.
net.ntp4
3.pool.
ntp.org
TEXT
""
Specifies the IP addresses of NTP (Network Time Protocol) servers.
