60
Pressing the [Split] button at the bottom of the screen while the conference call
is selected will separate the conference call. All calls will be separate and put
on hold. To continue with one participant select the call using the navigation
keys and press [Resume] to activate it. To end any of the calls select it using
the navigational keys and press the on-hook button.
NOTE:
Hanging up on a conference call you are hosting will hang up on
the connection between the active calls. The conference will not continue
after you leave. Hanging up on a conference you called into will only
remove you from the conference, not affect the other callers.
The FLX UC 1000 and FLX UC 1500 support a maximum of three lines for
incoming and outgoing calls (two SIP calls, one USB call). If the maximum of
calls is reached, no more calls can be made. Call forwarding can be set up to
forward a caller who calls in while the SIP lines are busy.
Using Do Not Disturb
When Do Not Disturb mode is active the device will not ring when calls are
coming in. Depending of the setup, the far end calling the FLX UC 1000/FLX
UC 1500 will receive a busy tone, or if call forwarding is configured, will be
redirected to the call forwarding number. The Do Not Disturb feature can be
configured using the dialer or the web UI.
