14
Connect one end of the Ethernet cable into the network connection port on the
bottom of the base unit using the network port. Press the Ethernet connector
until it clicks into place. Connect the other end of the Ethernet cable into a
jack providing PoE or a PoE adapter. The phone will power on. When it is
ready to use, the base will chime and the dialer will display the home screen.
If the Ethernet cable needs to be removed from the FLX UC 1000 or FLX UC
1500, be sure to depress the lever on the connector and pull the cable out
gently. Using force when removing this cable may damage the cable and
render it useless.
In order to place and receive VoIP calls, your FLX UC 1000 or FLX UC 1500 will
need to be registered with a call manager. See the section in this document
called “Configuring the FLX UC 1000 or FLX UC 1500 for your VoIP Network”
to register your device with a call manager.
Connecting to a Computer
Using the included USB cable, connect the mini USB side of the cable into the
port identified by the icon on the bottom of the base unit.
Connect the other end of the cable to the USB port on the computer running
the third party softphone, webinar, or conferencing application.
The computer may detect new driver software and install it; wait until the
install has completed before continuing. A USB symbol will be shown in the
FLX UC 1000 or FLX UC 1500 dialer screen when the computer is connected.
USB Connection
