Revo RH16NVR1, Руководство по эксплуатации

Страница: 36 / 82

Part 3 - Configuration
36
In order to display the system_log.txt file, you must
use the correct character encoding settings and use
a fixed-width font.
•
Clear All Data
: Erases all recording data. Selecting
Clear All Data displays a confirmation window.
Select Clear to proceed.
• Before you perform
Clear All Data
, make sure
you are not accidentally deleting important data.
Erased data cannot be recovered.
• Clear All Data does not affect the system log.
Instead, the Clear All Data event will be added
to the log.
• System Shutdown : Shuts down the system. When
prompted, select System Shutdown .
Date/Time
•
Date
: Used to change the system's date setting.
• Time : Used to change the system's time setting.
•
Date Format
/
Time Format
: Used to change the
system's date and time formats.
•
Time Zone
: Used to designate the system's time
zone.
Refer to the map displayed on the screen and
change the time zone using the mouse or the arrow
buttons.
•
Use Daylight Saving Time
: Enables DST
correction.
• Time Sync. : Select a time server for the system to
synchronize with.
1
Select Automatic Sync .
2
Enter the Time Server 's IP address or domain
name or select and then choose a server from
the list of registered time servers.
3
Specify the server synchronization Interval .
4
Select
OK
to apply and exit.
• If you have configured the DNS Server setting
under Network - IP Address , you can enter
the time server's domain name instead of its IP
address.
• Selecting
Run as Server
sets the current NVR as
a time server for other NVRs within the system.
•
Holiday
: Designate holidays. On specified
holidays, recording takes place according to the
holiday recording schedule specified under Record
Schedule.
1
Select the
+
button at the bottom of the window.
2
Select a date.
3
Select OK to apply and exit.
Select the icon to delete the existing holiday date.