GB
GB
INDICE
32
3. USER AND SETTING
1 -
NO
flashes. Press
or
select
YES
YES =
The thermostat is reset to the factory settings
NO =
The thermostat is not reset to the factory settings
3- Press the key
OK
for 5 seconds. The device returns to its initial
confi guration and goes back automatically to the home display of the user
4.1 ACCESS
You access to installer settings in 4 steps:
From Auto, Comfort, Eco or Frost protection mode:
Press for 5
seconds
Press briefly
twice
Infomation
display
Infomation
display
Press for 10
seconds
InSt
= Installer
settings
Press briefly
Setting sequence:
Open windows
PIN code lock
Restoring factory settings
4.2 OPEN WINDOW DETECTION, ACTIVATION / DEACTIVATION OF THE AUTO MODE
The automatic mode enabled is the default setting.
1 - Press
or
On
= automatic mode enabled
Off
= automatic mode disabled
2 - To save and move automatically to the next setting, press
OK
To exit the user settings, press twice
mode
3 times.
THE FOLLOWING FACTORY VALUES WILL BE EFFECTIVE:
Parameters
Factory settings
Operating
Comfort setting temperature
19°C
Boost duration
60 min.
Keypad lock
Disabled
User settings
Eco mode temperature lowering-level
-3,5°C
Frost protection temperature
7°C
Minimum set of Comfort setting temperature
7°C
Maximum set of Comfort setting temperature
30°C
Maximal Boost duration
60min.
Maximum ambient temperature for the automatic
stop of the Boost
35° C
Temperature unit
°C
Press
mode
to exit the user settings.
INDICE
4. INSTALLER SETTINGS
