GB
GB
INDICE
25
2. FUNCTIONING
Comfort mode
Non-stop Comfort mode. The device will operate 24
hours a day to achieve the temperature which has
been set (e.g. 19’C). The Comfort mode temperature
le vel can be set by the user (see Setting the comfort
mode temperature rif. par 2.6).
Eco mode
No-stop ECO mode. The device works to maintain
a temperature equal to that of Comfort. Mode tem-
perature minus 3.5°C. This enables you to lower the
temperature without having to modiefy the Comfort
Mode temperature. Select this mode far short term
absences (between 2 and 24 h)and during the night.
Frost protection mode
This mode enables you to protect your
home against the effects of cold weather
(frozen pipes, etc.), by maintaining a
minimum temperature of 7°C in it at all times.
Select this mode when you will be away from
your home far a long time (more than 5 days).
Restoring factory settings
See paragraph 3.8.
2.4 BOOST FEATURE
lmportant:
the Boost mode can be enabled at any time, whatever the
current operating mode (Autog, fort, Eco or Frost protection).
To activate Boost mode, press
the desired temperature setting will be
set at maximum for the time period you request. 60 minutes display will
flash by default.
- First press = Boost.
During the first minute: the boost symbol and the heating indicator ap pear
and the duration count flash.
During the first minute, you can modify the Boost duration from O to the maxi-
mal authorised duration of the Boost, such as defined during the user settings
(see page 12 for more details) by intervals of 5 minutes or more quickly by push
superior to 2 seconds) by pressing
and
. This modification will be
saved and effective for the next Boost.
Comment:
After 1 minute, you can modify temporarily the duration: it will be
valid only for this active Boost and therefore non-recurring.
- lf the ambient temperature reaches the maximal Boost temperature during the
count the device switches off but the Boost mode is always active.
The count is always displayed, the Boost symbol and the heating indicator flash on
the display. When the temperature drops under the maximal authorised tempera-
ture, the device will be restarted untiI the count ends.
By pressing a second time = Boost cancellation
The thermostat returns the previous active mode and the setting tem perature
appears.
2.5 GAUGE CONSUMPTION, ENERGY SAVINGS
France’s Agency for Environment and Energy Management (ADEME) re com-
mends a Comfort setting temperature lowerr or equa I to 19’C.
In the device display, a selector indicates the energy comsumption level by
positioning it in front of the colour: red, orange or green. So, depending on
the setting temperature, you can choose your level of energy usage. As the
temperature setting increases, the consumption will be higher. The gauge ap-
pears in Auto, Comfort, Eco and Frost protection modes and whatever the
temperature level.
C - RED COLOUR
High Temperature
level: it is advisable to
significantly reduce the
setting temperature.
SETTING TEMPERA-
TURE 22°C
When the set tempe-
rature is higher than
22°C
B - ORANGE
COLOUR
Average
tempe rature level: it
is advisable to slightly
reduce the setting
tempe rature.
19°C < SETTING TEM-
PERATURE
≤
22°C
When the set
temperature is higher
than 19°C and lower
or equal to 22°c
1
7 day and daily programme
Your device has been programmed and is executing Comfort and Eco mode
orders in line with the settings and time periods you have selected (see “7 day
and daily programme integrated” chapter page6)
2
Vithout programme if the 7 day and daily programme is not enabled or no
orders are being sent by pilot wire, then your device’s factory settings mean
that it will operate in nonstop Comfort mode, 7 days ofthe week.
auto - Auto Mode
In Automatic Mode, the device will automati-
cally change from Comfort mode to Eco mode
according to the established programme.
2 different cases depending on your set-up
A - GREEN COLOUR
Ideal temperature
SETTING TEMPERA-
TURE
≤
19°C
When the set tem-
perature is lower or
equal to 19°C
Modalità
Display
