GB
GB
INDICE
28
2. FUNCTIONING
2- By pressing
or
, you can change temporarily the desired tem-
perature up to 18°C for example.
Note: The cursor corresponding to the operating mode, i.e. Eco mode in our
example, is blinking during the duration of the temporary deroga tion.
3 - This change will be automatically cancelled at the next change of programme
or transition to 0:00.
7 - Once you have chosen a programme for each day, confirm your selec tion by
pressing
OK
. The days of the week will successively scroll on display with
the programmes that you set for them (Pl, P2, P3, CONF or ECO).
8 - To exit the Programming mode, press
mode
twice.
2.9.3 Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press
mode
for 5 seconds.
Press
mode
twice, the programme for each day of the week (Comfort, Eco, Pl,
P2 or P3) will scroll on display in front of you.
- To exit the programme viewing mode, press mode
mode
twice.
2.9.4 Manual and temporary exemption from a running
programme
This function allows you to change the setting temperature tempora rily untiI the
next scheduled change in temperature or the transition to 0:00.
Press
OK
to save.
The end time P1 (default set at 22:00) will start to flash. You can change the time in
increments of 30 minutes by pressing
or
.
Press
OK
to save.
6 - The program associated with the second day of the week (Tuesday)
will start to flash.
Repeat the procedure described above (in step 3 and 4) for all the days
of the week.
Example:
1- The device is in Auto mode, the running programme is Eco 15,5°C.
2.10 OPEN WINDOWS DETECTION, ENERGY
SAVING
• lmportant information about the open window detection
lmportant: the open window detection is sensitive to temperature va riations.
The device will react to the window openings in accordance with different pa-
rameters: temperature setting, rise and fall of tempe rature in the room, outside
temperature, location of the device...
lf the device is located close to a front door, the detection may be dis turbed by
the air caused by opening door. lf this is a problem, we recom mend that you dis-
able the automatic mode open windodetection (see page 13). You can, however,
use the manual activation (see below).
