GB
GB
INDICE
26
2. FUNCTIONING
2. FUNCTIONING
2.6 SETTING THE COMFORT
TEMPERATURE
It is possible to change the temperature of Auto and Comfort Mode. lt is
preset to 19°C.
Using
and
.you can adjust the temperature from 7°C to 30°C by
intervals of 0.5° C.
Note: you can limit the Comfort temperature, see page 12 for more de tails.
2.7 CONSUMPTION INDICATION
ACCUMULATED IN KWH, ENERGY SAVINGS
lt is possible to see the estimation of energy consumption in kWh since the
last reset of the energy meter.
• Display of the estimated power consumption
To see this estimation, from Auto,
Comfort, Eco or Frost protection mode,
then press button
OK
.
Press the
OK
key again to exit the
display mode of consumption:
press the button, the device is automatically
in the previous active mode.
• Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost protection mode,
then proceed as follows.
1. Press
OK
2- Press simultaneously and
for more than 5 seconds.
To exit resetting the energy meter, press button
OK
, the device is au-
tomatically in the previous active mode.
2.8 CHILD ANTI-TAMPER
KEYPAD LOCK/UNLOCK
• Keypad lock
To lock the keypad, press the
and
buttons and hold them
down for 10 seconds. The padlock
symbol
appears on the display,
the keypad is locked.
• Keypad unlock
To unlock the keypad, press the
and
buttons and hold them
down for 10 seconds again. The padlock symbol
disappears from the
display, keypad is unlocked.
When keypad is locked, only the key
is active.
lfthe device is on Standby mode when the keypad is locked,you have
to unlock it for the next heating on to access the setup.
2.9 - 7 DAY AND DAILY PROGRAMME
INTEGRATED, ENERGY SAVINGS
In this mode, you have the option of programming your device, by setting
one of the five programmes on offer for each day of the week.
2.9.1 Setting day and time
In this mode, you can set day and time to program your device in line with your
needs.
1 - From Auto, Comfort, Eco or Frost protection mode, press
mode
for 5 seconds.
The cursor moves to the setting day and time mode.
2 - Select using
or
. the two digits of the hour will flash.
The hours will scroll quickly if you press the
or
and hold them.
Save by pressing.
OK
3 - The two digits of the minute figures will flash
Select using
or
- Save by pressing
OK
