Revision 1.2a
Page 5 of 25
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Mercury 2 & Intuitive Mercury EPR Stepper Installation
Guide
www.resourcedm.com
Compatible Network Interfaces
Mercury and Intuitive Mercury controllers are capable of connecting to either a TCP/IP local area network, an RS485 Genus compatible
network, an RDM wireless mesh network or they can be used in standalone mode with no network output. To connect to a network you
must add the correct communications module. Connecting to any of these communication modules will automatically be detected on
power up and will affect the set up screens available to you.
Description
Part Number
IP Futura (Single Mercury to IP Interface)
PR0016
RS485 Interface (Single Mercury to RS485 Interface)
PR0026
Mercury IP Switch (IP support for 10 controllers)
PR0018
Mercury IP Switch with Pressure/Humidity Inputs
PR0018-PHI
Wireless Mesh Interface (for single Mercury)
PR0730
The Intuitive Mercury Controller is supplied as standard with an internal RS232 network card, this allows connection to any of the above
external network interfaces. Three alternative internal network cards are also available, these can be supplied factory fitted as an option
or purchased separately as an interface kit.
Description
Part Number
Intuitive Internal IP Network Card Interface Kit
PR0770
Intuitive Internal RS485 Network Card Interface Kit
PR0771
Intuitive Internal Wireless Mesh Network Card Interface Kit
PR0772
Front Display Features
LED’s: -
Valve (Relay 3)
Fans (Relay 1)
Lights (Relay 2)
Defrost (Relay 4)
Keys
On-Line
Off
No network attached
Flashing Attempting to Log on to network
Steady
On-line
Service
(See Parameter
18 for setup)
Alarm
Main Display
HACCP
Enter
Up Down
Defrost
Note: Function keys illuminate when pressed, illumination is turned off 20 seconds
after the key is used. Press and hold the defrost button to force a manual defrost
4 character LED display, used to display temperature and status messages.
