Tactical ResQmax Operation Manual
6
Note:
When installed
in the Launcher,
the Projectile
Nozzle Valve
should remain
closed at all
times except
immediately
prior to
discharge.
Safety Features
The Launcher Safety Assembly automatically engages each time a projectile is inserted,
preventing accidental launch of a Projectile. An audible “Click” is heard as the Projectile engages,
signaling that the Projectile is safely engaged with the Launcher Mechanism.
A Pressure Relief Assembly is installed in the nozzle of each Projectile. Its purpose is to prevent
any unsafe pressure build-up in a filled Projectile, whether in the Launcher or not, if exposed to
extreme heat, such as from a fire. This Pressure Relief Assembly will rupture if the air pressure
goes over a safe limit. The Pressure Relief Assembly is not reusable and must be replaced if it
should ever fail.
A second Pressure Relief Assembly is installed on the Launcher Mechanism and is active at all
times when the Mechanism is pressurized. A spare Pressure Relief Assembly is provided with
each Tactical ResQmax.
Multi-Shot Capacity
Our patented Nozzle Valve Assembly permits any number of Projectiles to be pre-charged
and stored with each unit, allowing deployment of multiple Projectiles in rapid succession.
Properly maintained Projectiles will hold a charge for one year or longer.
Fueled by Compressed Air
The ONLY intended fuel for this system is compressed air, which is non-flammable and non-
combustible.
CAUTION: The use of any other compressed gas, either flammable and/or
combustible (including nitrox or other oxygen-enhanced mixtures), may result
in a spontaneous explosion causing severe injuries or death.
Note:
This equipment
is
NOT
oxygen
safe! Never use
a compressed
air mixture that
includes an
elevated level of
oxygen.
