Tactical ResQmax Operation Manual
25
Figure 23d - Configure Lines along
Sides of Projectile
Cut-Away Pin
5. Return the Line towards the Grappling
Hook along the opposite side of the
Projectile (Fig. 23d).
6. Together with the Line keep the Bridle
Lines along the side of the Projectile in
order to align with the grooves on each
side of the Launcher Barrel (Fig. 23e).
7. Keeping the Lines along the side of the
Projectile, insert the Projectile into the
Launcher (refer to page 14). Ensure the Bridle
Lines are centered to achieve a straight shot
by pulling the Quick-Link.
8. Re-engage the Cut-Away Pin to fasten the
Line Container Door closed.
9. Using the Quick-Link on the Bridle Lines,
attach the Bridle Lines to the loop containing
the Cut-Away Pin on the Line (Fig. 23f).
10. Connect the “dead end” to the Eyelet behind
the inverted “T” bracket of the Launcher
(Fig. 23f) .
Figure 23e - Align Line and Bridle Lines along
each side of Projectile
Bridle Lines attached to
loop with Cut-Away Pin
“Dead End” Secured to
Eyelet on Launcher
Figure 23f - Line and Climbing
Grappling Hook Ready for Deployment
Note:
The length
of the Line
between the
Eyelet and
the Cut-Avay
Pin MUST be
greater than
the distance
between the
Eyelet and the
Bridle Lines
Quick-Link. The
load of the Line
MUST be borne
by the Bridle
Lines to insure
accuracy during
the deployment.
