Tactical ResQmax Operation Manual
13
Note:
If the Trigger is
moved forward
manually prior to
another Projectile
being inserted,
it is necessary to
press the Safety
Push Knob to
release the Safety
internally, prior
inserting another
Projectile.
Note:
For maritime
applications, the
Safety can be
reset by applying
forward pressure
on the arm of the
Safety Push Knob.
This arm provides
for easy use if
the end-user is
wearing gloves.
Operating the Safety Push Knob
The Safety Push Knob is located on the same side
of the Launcher as the Valve Key, and directly
above the Trigger.
This Safety Push Knob is at rest when protruding
slightly from the side of the Launcher housing
(Fig. 11a).
The Safety Assembly engages automatically
each time that a Projectile is inserted into the
Launcher. An audible “Click” indicates that the
Safety Assembly has engaged and the Safety
is
ON.
Press the Safety Push Knob to the
OFF
position
immediately before firing the Launcher. When
the safety is in the
OFF
position the Safety Push
Knob remains recessed inside the cavity about
¼”/ 6 mm (Fig. 11b).
After firing the Launcher, the Safety Assembly
will reset itself to accept the next Projectile.
When a new Projectile is loaded, the Trigger will
automatically move forward and the Safety will
engage to
ON
position.
Resetting the Safety
If the Safety Push Knob has been pressed to the
OFF
position – and for any reason it becomes
necessary to reset the Safety without firing the
Launcher – apply forward pressure on the arm
of the Safety Push Knob and rotate the Safety
Push Knob clockwise. A rotation of only a few
degrees is required (Fig. 11c). The Safety Push
Knob will return to its rest position, protruding
slightly from the side of the Launcher housing
– indicating that the Safety Assembly has been
re-engaged and the Safety is in the
ON
position
(Fig. 11a).
Figure 11a - Safety Engaged -
ON
Figure 11b - Safety Disengaged -
OFF
Figure 11c - Reset Safety
Note
Safety
ON
Safety
OFF
Push to
Rotate
